Nady Systems SRM-10X User Manual
Page 9
b. Main Mix Function and Operation
(23) MONO OUTPUT
(26) STEREO OUTPUTS
(27) TAPE INPUTS
(28) REC OUTPUTS
(40) MASTER MIX MONO CONTROL
(41) MASTER MIX STEREO CONTROL
(36) LED OUTPUT METER
The mono sum signal of the Left and Right buses is sent to
the Mono output which is controlled by the Mono fader (40).
The Stereo Outputs are Left (L) and Right (R) unbalanced
1/4" TRS phone jacks, wired: Tip = positive (+), Sleeve =
ground. The REC Outputs (28) also provide an output of the
Master Mix. These outputs are RCA jacks, and designed
primarily for inputs to tape recorders, etc.
The output level routed to the Stereo Outputs and REC
Outputs is determined ultimately by the setting of the Master
Mix Stereo Control (41). The Master Mix is the sum of the
signals routed from all the channels and also the inputs from
the AUX return bus and the Tape Input (27). The level of
signal from DAT, tape decks, CD players, etc., input to the
Tape In (27) is determined by the setting of the Tape In (31)
level control.
The 6-stage LED Output Meter (36) displays the Master Mix
Stereo, Mono, PFL or AUX send output level.
3. MASTER SECTION
a. AUX Sends/Returns Function and Operation
(29) STEREO AUX RETURNS LEFT/MONO
(30) STEREO AUX RETURNS RIGHT
(12) AUX RETURN CONTROLS
The Aux Return jacks are the mono or stereo returns for AUX
7-10. If you connect a signal to the Left/Mono Return jack
only, the Aux Return will operate in mono and the signal will
be routed to the respective Aux Return Control (12) and
then mixed into the left and right Stereo Outputs (26). The
separate left and right return jacks are provided for use with
stereo signals such as those from the output of a stereo
effects processor. The left and right return signals will be
routed to the AUX Return level controls (12) and mixed into
the left and right Stereo Out (26), while maintaining stereo
separation. The Aux Returns are multi-functional. They may
be used for returning the outputs of effect units, as Tape
Returns from a multi-track recorder, or as extra instrument
inputs, especially if your MIDI keyboard or rack supplies a
pre-mixed stereo signal.
(20) AUX SEND
The Aux Send jack is the output for the signal sent from the
channel Aux controls (7, 15). It is a 1/4" unbalanced phone
jack wired: Tip = positive (+), Sleeve = ground. Master Aux
Send levels are adjusted by the Master Aux Send control
(37).
C O N T R O L S A N D C O N N E C T I O N S
9
(20)
(21)
(26)
(27)
(28)
(22)
(23)
(24)
(25)
(29)
(30)