Nady Systems SRM-10X - Manual (Page 12)

S P E C I F I C AT I O N S
3. FREQUENCY RESPONSE
ANY INPUT TO
ANY OUTPUT ........................................20Hz ~ 20kHz +/-3 dB
4. TOTAL HARMONIC DISTORTION
ANY INPUT TO
ANY OUTPUT..................................................................0.08%
5. INPUT CHANNEL EQUALIZATION
High ........................................12k, +/-15 dB, Q fixed at 2 oct.
Low ....................................80 Hz, +/- 15 dB, Q fixed at 2 oct.
Low Cut (High Pass)
filter (Mono channels only)............75 Hz, -3 dB (18 dB/octave)
6. GAIN CONTROL RANGE
Mono input channel
trim control........................................................................40 dB
Channel/Master gain controls.................... +14 dB from 0 dBm
Aux Send ..................................................+12 dB from +4 dBm
7. CROSSTALK @ 1KHZ
ADJACENT CHANNEL INPUTS ..................................-100 dB
INPUT TO OUTPUT.................................................... -40.6 dB
8. HUM AND NOISE
Residual Output Noise ..............................................-73.7 dBm
S/N Ratio ..................................................................-93.3 dBm
9. VU METERS
6-segment LED X 2 (+7 to -10) L/R
10. PHANTOM POWER
+48 VDC, globally selected
11. POWER REQUIREMENTS
External PSU, 120 VAC/60Hz or 230 VAC/50Hz
12. POWER CONSUMPTION
16.2 Watts, External PSU
13. DIMENSIONS AND WEIGHT
8.125" x 1.625" x 9" (206 mm x 41 mm x 228.6 mm),
3.30 lbs (1.5 Kg), External PSU not included
1. INPUT SECTION
Input Connector Input Impedance Nominal Level Max Level
MONO CH MIC XLR 1.3K
Ω
-28 dBm -1.0 dBm
MONO CH LINE 1/4" TRS 11K
Ω
-10 dBm +17 dBm
STEREO CH LINE 1/4" TRS 10K
Ω
-10 dBm +10 dBm
STEREO TAPE IN RCA PIN JACKS 10K
Ω
-9 dBm +8 dBm
AUX RETURNS 1/4" TS 5K
Ω
-11 dBm +8 dBm
2. OUTPUT SECTION
Output Connector Output Impedance Nominal Level Max Level
STEREO OUT L/R 1/4" TS 210
Ω
+4.6 dBm +20 dBm
AUX SENDS 1/4" TS 210
Ω
-22.2 dBm -6.4 dBm
CNTRL R. OUT 1/4" TS 22
Ω
-19.4 dBm +20 dBm
REC OUT RCA PIN JACKS 1K
Ω
-10.6 dBm +4.8 dBm
PHONES 1/4" TRS 22
Ω
+19.4 dBm 22mW X 2
12
The specifications above are correct at the time of printing of this manual. For improvement purposes, all specifications for this unit,
including design and appearance, are subject to change without prior notice.
Setting: MONO OUT, +4dBm/400Hz, All Pots at MID, Master at MAX.