Nortel Networks 743X - Manual (Page 17)

17
Display softkeys
Three display softkeys are used to
activate feature options that appear
on the third line of the display.
The following graphic shows the
softkey mapping for feature options
on the third line of the display.
Display backlight
The display backlight automatically
turns on when there is an incoming
call, or if a key is pressed.
The backlight turns off after 10
seconds when the handset is idle.
You can disable the backlight to save
power, refer to the
“Customizing
handset” section in this guide for
more information.
Note: The backlight is disabled when
the key lock function is activated.
NEXT CALL ERASE
Display softkey mapping example
Display s Line 3
2 1 3
Display softkeys Display softkeys Display softkeys