Nortec Industries MHTC - Manual (Page 2)

Key benefits of the innovative V-Profile humidifier media box:
Low Pressure Drop
Hygroscopic Coating
UL 900 Class 1 Rating
High Velocity Performance
Suitable for all Water Quality
No Droplets, Free of Aerosols
MHTC - Total Control System
The MH control unit controls the humidity and governs the water management to maximize efficiency. The integrated processor
with real-time clock controls the air humidity, pre-cleaning sequences, unit purging and water quality control, all fully automatically.
The controller is designed for connection to building management systems (BMS). This means that parameters such as
humidifying requirement, water consumption, maintenance requirement or operating hours can be transmitted further via modbus,
LON Talk or BACnet with LINKS2.
The electronic control cabinet includes electrical fusing and main power switch.
One, two or three stage control through magnetic staging valves is available. Microprocessor PI-controlled analog humidity signals
for flexibility. Controlled flushing of the water tank in function of the filling cycles or time controlled drainage through the integrated
real time clock. Programmable wash cycle for cleaning the humidification media. Automatic flushing of the water lines at the end of
a season shutdown or without a call for humidity. An automatic forced drain after shutdown periods longer than 72 hours, an
interruption in humidifying requirement of over 72 hours or in the case of a power failure.
TC Total Controller Management System
Key Benefits:
Smart Water Management
Advanced Hygiene Control
Capable of Monitoring & Control via Internet or BMS
Full Functional Operating Panel
Adjustable Flush Cycles
Pre-Cleaning Sequence
Programmable Maintenance
Conductivity Monitoring
UV Sensing