Nokia HS-3W - Manual (Page 11)

G e t t i n g s t a r t e d
11
English
Note that switching on the headset creates the connection
automatically only if you have set the phone to accept Bluetooth
connection requests without your permission. In compatible Nokia
phones this can be done by changing your paired devices settings in the
Bluetooth menu.
■ Troubleshooting
If you cannot connect the headset to the compatible phone, proceed as
follows:
• Make sure that the Bluetooth feature is activated on the compatible
phone.
• Make sure that the headset is switched on and paired with the
compatible phone.
• Make sure that you have disconnected the previous Bluetooth
connection from the phone.
• Check that the headset is within 10 metres of the phone and that
there are no obstructions, such as walls, or other electronic devices
between the headset and the phone.
• The pairing information list of the headset may be full. The headset
can store the information of up to 8 phones at a time. If the list
becomes full, reset the headset to the original settings, see Resetting
the headset on page 16.
• If the headset does not automatically reconnect to the default/last
user, press and hold the answer/end key.
hs-3W_en_1st_tab.fm Page 11 Tuesday, December 16, 2003 10:31 AM