Network Technologies NTI UNIMUX UNIMUX-USBV-2 - Manual (Page 14)

NTI UNIMUX 2-PORT USB KVM SWITCH
11
It is also possible to configure the UNIMUX-USBV-2 to emulate a specific international Sun keyboard regardless of what actual
keyboard is connected. This is recommended when the CPU needs the layout code (i.e. a SUN CPU) and the keyboard doesn't
have an explicit layout code (i.e. some Windows keyboards). To do this, manually set the UNIMUX-USBV-2 indicate the
international keyboard identification number to the CPU using the following procedure;
1. Connect the keyboard to be used to the UNIMUX-USBV-2
2. Disconnect power from the UNIMUX-USBV-2 for at least 3 seconds
3. Reconnect power to the UNIMUX-USBV-2
4. Enter Command Mode
5. Type Lxx, where xx is the number from the list below that corresponds to the desired country code
6. Exit Command Mode
7. Disconnect power from the UNIMUX-USBV-2 for at least 3 seconds
8. Reconnect power to the UNIMUX-USBV-2
9. Reboot the CPU connected to the UNIMUX-USBV-2
Country Codes
00 Not Supported 18 Netherlands/Dutch
01 Arabic 19 Norwegian
02 Belgian 20 Persian (Farsi)
03 Canadian-Bilingual 21 Poland
04 Canadian-French 22 Portuguese
05 Czech
Republic 23 Russia
06 Danish 24 Slovakia
07 Finnish 25 Spanish
08 French 26 Swedish
09 German 27 Swiss/French
10 Greek 28 Swiss/German
11 Hebrew 29 Switzerland
12 Hungary 30 Taiwan
13 International (ISO) 31 Turkish
14 Italian 32 UK
15 Japan (Katakana) 33 US
16 Korean 34 Yugoslavia
17 Latin American 35-99 Reserved