Network Technologies KEEMUX-Px - Manual (Page 15)

NTI KEEMUX Series PS/2 KVM Switch
11
User Login Mode (Cont'd)
Function:
Keystroke:
Submit user name/password
Exit User Login Mode and return
to previous mode. This function
is only available if security is
not currently active.
.
Additional Modes Available With Security
NOTE: The lists that follow are only available if the administrator is logged in.
Administration Mode
Administration Mode allows the administrator to use the following functions:
Function:
Keystroke:
Change the administrator’s
password
Enter User Name List Mode
Disable security
Selects the idle time in seconds
Exit Administration Mode and
return to previous mode
Administrator Password
To change the administrator password press from
the Administration Mode menu.
The administrator is able to change the administrator
password as needed (see Fig. 9). Two edit fields are
available, one for password, the other for verify password.
The password can be up to 13 characters in length.
Note: The default password for the
administrator is ADMINISTRATOR
.
Figure 9- Administrator password change
Esc
Enter
If the password submitted is incorrect, the user will not be
able to proceed.
If the password submitted is correct, the user will proceed
to the maintenance menu for additional feature options.
Esc
T - -
(xxx from 000 to 255. ie. t002
would set the time-out period
for 2 seconds. 000 will disable it)
- (0-2)
x (0-9)
x (0-9)
x
S
C
U