NAD T571 - Manual (Page 14)

14
GB
Connections
NOTES
• Refer to the owner’s manual of your TV for TV operating instructions.
• Before you connect the DVD player to your TV, be sure to turn off the power and unplug both units from the wall outlet before making any
connections.
• Connect the DVD player to your TV directly. If you connect the DVD player to a VCR, the playback picture will be distorted because DVD video
discs are copy protected.
• In case of the TV set corresponding to RGB signal, the RGB signal is automatically selected in the TV (Only when the “VIDEO OUTPUT Switch” is
set to “SCART/RGB” on the Rear Panel).
WARNING
Do not set the Digital Audio Output of this DVD player to “Dolby Digital” unless you are connecting the DIGITAL OUT jack of this DVD player to an
AV decoder that has the Dolby Digital decoding function. High volume sound may damage your hearing as wellas the speakers (Refer to “Selecting
Digital Audio Output” on page 21).
CONNECTING TO A TV
VIDEO OUTPUT SELECT switch
21-pin SCART Cable (Not supplied)
To VIDEO OUT To AUDIO OUT (L/R)
Audio/Video cable
(supplied)
To S-VIDEO OUT
S-video cable (Not supplied) To S-video input
To audio inputs
To video input
TV or monitor with
audio/video inputs
To 21-pin SCART socket
For using SCART’s RGB signal, set the “VIDEO
OUTPUT” switch to “SCART/RGB” or for
using S-VIDEO OUT jack, set the “VIDEO
OUTPUT” switch to “S-VIDEO”.
If the TV has an S-video input,
connect the DVD player with the
S-video cable.
To SCART
T571 manual (GB) 19/11/01 2:14 pm Page 14