NorthStar Navigation Echo Sounder NorthStar 491 - Manual (Page 51)

491 Echo Sounder Operations Manual Page 47
Snapshot screen (961/962 only)
To rename a stored snapshot, from the SNAPSHOT screen,
press the CURSOR PAD to highlight the desired slot, and press
RENAME. Use the KEYPAD to enter a new name and press
ACCEPT.
To display a stored snapshot, from the SNAPSHOT screen,
press the CURSOR PAD to highlight the desired slot, and press
DISPLAY. When finished, press RETURN.
To erase a snapshot from a slot, from the SNAPSHOT screen,
press the CURSOR PAD to highlight the desired slot, and press
ERASE. You’ll be asked to confirm erasure by pressing YES.
The slot will be erased to make room for a new snapshot.
Archiving and
restoring a
snapshot with a
floppy disk
If your 961/962 has a floppy disk drive installed, you can save
one snapshot on each disk.
To save a stored snapshot onto a floppy disk, from the
SNAPSHOT screen, press the CURSOR PAD to highlight the
desired slot, and press ARCHIVE. Insert a floppy disk and press
OK. Any old data on the disk will be erased!
To restore a snapshot from a floppy disk to any empty slot,
from the SNAPSHOT screen, press the CURSOR PAD to
highlight the desired empty slot, and press RESTORE. Insert
the floppy disk and press OK.