Nilfisk-Advance America Sweeper SR 1700D 2W D - Manual (Page 45)

USER MANUAL
33014815(1)2005-07 A 7
Stability
Machine stability depends on the conditions in which it is
used.
If the machine is used within the conditions of use specified in
the manual, it is stable.
To this end, the following tests were carried out under the
same conditions on a prototype identical to the series model
and no stability problems arose. The conditions were:
Flat ground with good surface conditions:
–
Transfer maximum speed: 14 km/h
– Working speed: from 1 to 8 km/h
– Bending radius (maximum speed of 14 km/h): 3 m
– Bending radius (speed of 5 km/h): 0 m.
On sloping ground with good surface conditions and
maximum longitudinal slope of 20%:
–
Bending radius (maximum speed of 5 km/h): 3 m
– Bending radius (speed of 1 km/h): 0 m.
Maximum crossfall while in transfer: 15%.
Maximum crossfall, at 5 km/h: 20%.
The tests were carried out with lowered and empty hopper.
For different conditions of use, the machine operator should
be able to assess the limits of the machine,
and should, in any case, follow the indications laid down in the
manual.
Information on brooms
Side brooms (2, Fig. E)
–
Polypropylene side broom
– Polypropylene and steel side broom
– Steel side broom
– Nylon side broom
Main brooms (13, Fig. E)
–
Natural fibre and polypropylene main broom
– Polypropylene main broom
– Polypropylene and steel main broom
– Nylon main broom
Brooms with a moplen shaft or with different bristles can be
supplied on request.
SAFETY SYSTEMS
The machine is provided with:
–
An operator's seat sensor that stops the machine as
soon as the operator leaves the seat;
– A safety lever on the joystick to avoid accidental wrong
operation.
MAIN TECHNICAL DATA
General data Values
Sweeping system Mechanical suction
Loading system Front
Sweeping range with one side broom 1,300 mm
Sweeping range with two side brooms 1,700 mm
Collection width 1,000 mm
Standard hour working capability 21,000 m2/h
Main broom length 994 mm
Main broom diameter 380 mm
Engine Lombardini LDW1003
Broom motor Hydraulic
Drive motor Hydraulic
Suction motor Electric 12 V
Drive type Hydrostatic
Gradeability 20%
Maximum drive speed 15 Km/h
Dust filters Polyester multi-pocket
Filtering surface 8.5 m²
Hopper Front
Capacity 360 litres
Dumping type Multilevel
Dumping height 1,510 mm
Lifting type Hydraulic
Overall dimensions Values
Length 2,500 mm
Width 1,350 mm
Height 1,570 mm
Weight in running conditions 1,280 Kg
Diesel engine Values
Make Lombardini
Type LDW1003
Cylinders 3
Displacement 1,028 cm³
Bore 75 mm
Stroke 77.6 mm
Compression ratio 22.8 : 1
Maximum speed 3,600 rpm
Maximum speed (in running condition) 2,450 rpm
Maximum power 15 kW
Battery 12 V 80 Ah