Slave mode – Nikon XT100 User Manual
Page 42
42
11. SLAVE MODE
Slave Mode is a semi automatic mode. Op
erated in this mode the turntable rotates till
the point of making the next frame after
pressing the camera shutter release. The
mode is more convenient as there is no need
to use remote control for the turntable rota
tion, i. e. first the picture is made and then the
turntable rotating surface spins automatical
ly till the next frame and so on. The operation
order in this mode is as follows:
1. Connect the turntableto the sync termi
nals of the camera (Fig. 11.1) and flash
by means of the splitter and cables (Fig.
11.2) as it is pointed out in item 6.2
above via «М» connector.
Figure 11.1
Figure 11.2
This manual is related to the following products: