Installation – Nikon XT100 User Manual
Page 16
16
5. INSTALLATION
Prior to photography locate the turntable on
a flat, horizontal and steady surface in your
photo studio or any other photography site at
your option in order to get the most efficient
position for photography. Avoid unstable or
vibrating places. Arrange the turntable so
that its control panel faces the camera.
For the XT 350 turntable to be easily moved
about your photo studio it is supplied with a
handle and 2 small wheels. To move the turn
table pull out the handle located on its bot
tom (Fig. 5.1) against the stop; then begin
lifting the turntable till its whole weight rests
on the wheels (Fig. 5.2). After placing the
turntable at the required point let it acquire
horizontal position again and push the han
dle back as far as it will go.
Figure 5.1