beautypg.com

Models nm, Page – NuTone nm200 User Manual

Page 6

background image

models nm

200

• nc

300

Page

door station functions

When the button on the Door Station is pressed, the chime is

heard on all stations set to Intercom or Radio/INT, even if the

PRIVACY button is activated.
• All system audio (music and intercom) is muted when the

chime rings.

• If the Door Station is engaged in a talk or listen session, the

chime is not heard.

cd player operation (optional)
1. Load up to 6 CDs in the CD changer.
2. Press POWER to turn on music.
3. Select CD as the music source. See Master Station Settings/

Music Settings/Music Source for instructions.

When CD is selected as the music source, the display shows

the following information:
• Which CD is playing, indicated by a circle around the CD

number.

• The track that is playing, indicated by the number on the

display.

Note: The display will initially show six CD positions. If the

CD player reaches a CD position and does not find a CD

loaded at that position, that position number disappears from

the display.

• Talk
Talk to all remote stations set to Intercom or Radio/INT.
• Privacy
Press in PRIVACY button to disable Listen and Monitor

functions.

• Speaker Volume
Use Speaker Volume knob to adjust the remote speaker

volume.

• Music Volume
turn music source on and off
You can turn the Music Source on and off from any Remote

Station.

To turn the Music Source on, press and hold the MUSIC

VOLUME UP button.

To turn the Music Source off, press and hold the MUSIC

VOLUME DOWN button until the volume level goes to zero.

adjust system music volume
Adjust the system music volume from any Remote Station by

pressing VOLUME UP or VOLUME DOWN.

• Select Music Source
The system music source can be selected from any Remote

Station. The music sources that are available vary depending

on the Scan setting on the Master Station (See Master Station

Settings/Music Settings/Scan Mode for details).

Note: You cannot select specific tracks on the CD from a

Remote Station.

To scan for a music source:
Simultaneously press and release VOLUME UP and

VOLUME DOWN to switch music sources.

Note: If you press and hold these buttons for 4 seconds or

more, you initiate the Security/Home Automation function (See

Intercom Operation/Security/Home Automation for details).

This function is not available on the Outdoor Remote Station.