NuTone nm200 - Manual (Page 5)

models nm 200 • nc 300
Page
talk
Talk allows users to talk to all stations with selector switches set
to Intercom or Radio/INT, unless they have PRIVACY button
pushed in.
To initiate a Talk/Listen session, press TALK and begin talking.
You can hear remote users if you press the LISTEN button or if
they press their TALK button.
listen
Press LISTEN to listen to all stations set to Intercom or Radio/
INT. You cannot hear stations that have PRIVACY activated.
door talk/listen
• Press TALK and LISTEN simultaneously to enter Door
Talk mode. This allows you to talk to the Door Stations.
All other stations set to Intercom or Radio/INT can hear
the conversation, unless they have the PRIVACY button
activated.
• Release the TALK and LISTEN buttons to listen to the Door
Station. The Listen mode is active for a total of 25 seconds
after you release the TALK and LISTEN buttons. You may
talk again at any time by pressing TALK and LISTEN. Each
time the buttons are released, you can listen for another 25
seconds.
• Door Talk mode is suspended at the end of the 25 second
listening period or if you press either the TALK button or the
LISTEN button individually.
monitor
All stations set to Radio/INT on the Master Station can continually
hear the sound and activity from a station set to Monitor.
monitor override
From the Master Station, you can temporarily override the
Monitor so you can communicate with stations set to Monitor.
When Monitor Override is off, stations set to Monitor cannot hear
any intercom communication or the door chime. When Monitor
Override is on, stations set to Monitor can hear only incoming
talk from other remote stations.
To turn Monitor Override on and off:
Remote Station Functions
• Door Talk/Listen
Press TALK and LISTEN simultaneously to talk to the Door
Stations. Release both buttons to listen.
• Listen
Listen to all stations set to Intercom or Radio/INT unless they
have the PRIVACY button activated.
intercom operation
• Other Remote Stations cannot listen to the room.
• The room cannot receive music or intercom-related audio.
• The room cannot be monitored.
• The station does not hear the door chime and cannot talk
and listen to the Door Station.
monitor
When a station is set to Monitor:
• Any station set to Radio/INT can continually hear all sound
and activity in the room.
• You can communicate with other remote stations.
• The room cannot hear the door chime.
• You can talk to the Door Station, but will not be able to listen
to it.
• The room cannot receive music.
• Other rooms can talk to a monitored station, if the monitor
override is set to On.
To change the setting, simultaneously press and release AUTO
and POWER. The display shows either ON (Monitor Override
- on) or OFF (Monitor Override - off).
Note: Exit the monitor override setting by pressing AUTO and
POWER or waiting for the display to show the clock time again.
privacy
When the PRIVACY button is activated at a station, the station
cannot be listened to or monitored.
• The room can still communicate using the Talk feature.
• The room still receives music.
• The room will still hear the door chime.
security/home automation (optional)
This optional function can control another system that is properly
connected to the NM200. For example: it may control a door
release mechanism, turn on the lights, set off an alarm, etc. This
function is available from the Master Station and all Remote
Stations (NRS200). It is not available from an Outdoor Remote
Station.
To initiate this feature from a remote station:
1. Simultaneously press VOLUME UP and VOLUME DOWN
and hold for at least 4 seconds. After 4 seconds, this feature
is active for as long as the buttons are pressed.
2. Release the buttons to deactivate the feature.
master station operation
radio operation
1. Press POWER to turn on music.
2. Select either FM or AM as the music source. See Master
Station Settings/Music Settings/Music Source for
instructions.
3. Use TUNE UP or TUNE DOWN to select a station, or press
PRESET to select a preset station.
indoor/outdoor remote station operation