English – Nostalgia Electrics KRS-2150 User Manual

Page 13

ENGLISH

STEP 6

The CO2

Rubber
Directional

Washer goes
back into the

Keg Coupler.

STEP 7

Connect the
CO2 line from

the Double
Regulator

to the Keg

Coupler.

STEP 11

After the Tap Tower has been placed
on the KEGORATOR™ and the hose
line feeds through the bottom, attach
the wing nut to the Keg Coupler.

STEP 8

Place the Tap Tower on the
KEGORATOR™ and feed the

hose line through the hole in the
top of the KEGORATOR™

STEP 9

Make sure the notches in the Tap
Tower fit into the holes in the top of the
KEGORATOR™

. Tighten the Tap Tower

by twisting until it locks in place.

STEP 10

Place Coupler Washer (#3)
on top of the Keg Coupler.