Niles Audio RCA-HT - Manual (Page 15)

NILES AUDIO CORPORATION – 1-800-BUY-HIFI
13
INSTALLATION
(CONTINUED)
ADDITIONAL SENSORS
The Remote Control Anywhere! Kit includes one surface mount sensor. The included MSU250 main
system unit will accommodate a second IR sensor. Niles makes a variety of sensors for virtually any
application. See your Niles dealer for more information.
RUNNING SENSOR CABLE IN NEW CONSTRUCTION
SCHEDULING AND PREPARATION
Plan to schedule the sensor wiring after the electrical wiring is finished. That way you can avoid
cable routes which could potentially induce interference over the sensor cable. The basic rules are:
Never run the sensor cable through the same hole as an electrical cable.
Never run the sensor cable into the same J-box as electrical cable.
Avoid running the sensor cable beside the electrical cable. Keep it at least 3 or 4 feet distant
from any electrical power cable.
As side-by-side wiring is unavoidable in particular spots in every house, just move the sensor cable
route away as soon as possible. If construction forces a side by side run for more than ten feet,
install metal conduit or shielded sensor cable. Low-voltage cables such as doorbells, intercoms,
telephone, speaker, security, or television cannot cause interference on your sensor cables, so you
can safely run all of them at the same time, through the same holes, side-by-side.