National Instruments Compact FieldPoint Mounting Accessories cFP-21xx - Manual (Page 3)

© National Instruments Corporation 3 Compact FieldPoint Mounting Accessories
1. Align the captive screws on the
controller with the holes in the
base.
2. Using a number 2 Phillips
screwdriver with a shank of at
least 64 mm (2.5 in.) length,
tighten the captive screws to
1.1 N · m (10 lb · in.) of
torque. Com pa ct Fie ldpo int
POW ER STA TUS A
B
C
D
RES ET
IP ADDRESS:
ETHERNET
C
V1
V2
N114
188794C-01
TOP
100M bps
INPUT 11-30V 1.5A MAX