beautypg.com

Lights -25, Headlights -25 fog lights (if so equipped) -25 – NISSAN TITAN 2010 User Manual

Page 333

background image

FCC Notice:
Changes or modifications not expressly ap-
proved by the party responsible for compli-
ance could void the user’s authority to op-
erate the equipment.

This device complies with Part 15 of the
FCC

Rules

and

RSS-210

of

Industry

Canada.

Operation is subject to the following two
conditions: (1) This device may not cause
harmful interference, and (2) this device
must accept any interference received, in-
cluding interference that may cause undes-
ired operation of the device.

HEADLIGHTS
Replacing the halogen headlight bulb

The headlight is a semi-sealed beam type which
uses a replaceable headlight (halogen) bulb. Be-
cause the headlight assembly must be removed
from the vehicle for bulb replacement, see your
NISSAN dealer.

CAUTION

High pressure halogen gas is sealed

inside the halogen bulb. The bulb may
break if the glass envelope is scratched
or the bulb is dropped.

When handling the bulb, do not touch

the glass envelope.

DO NOT TOUCH THE BULB WITH BARE

HANDS.

Do not leave the bulb out of the head-

light reflector for a long period of time
as dust, moisture and smoke may enter
the headlight body and affect the per-
formance of the headlight.

Aiming is not necessary after replacing

the bulb. When aiming adjustment is
necessary, contact a NISSAN dealer.

NOTE:

Use the same number and wattage as
shown in the chart.

Fog may temporarily form inside the lens of the
exterior lights in the rain or in a car wash. A
temperature difference between the inside and
the outside of the lens causes the fog. This is not
a malfunction. If large drops of water collect
inside the lens, contact a NISSAN dealer.

FOG LIGHTS (if so equipped)

Replacing the fog light bulb

CAUTION

High pressure halogen gas is sealed

inside the halogen bulb. The bulb may
break if the glass envelope is scratched
or the bulb is dropped.

When handling the bulb, do not touch

the glass envelope.

Use the same number and wattage as

originally installed as shown in the
chart.

LIGHTS

Maintenance and do-it-yourself

8-25