beautypg.com

How to use remote keyless entry system -9 – NISSAN TITAN 2010 User Manual

Page 147

background image

HOW TO USE REMOTE KEYLESS
ENTRY SYSTEM

Locking doors

1. Close all windows.

2. Remove the key from the ignition switch.

3. Close the hood and all doors.

4. Press the

button on the keyfob. All

the doors lock. The hazard warning lights
flash twice and the horn beeps once to
indicate all doors are locked.

● When the

button is pressed with all

doors locked, the hazard warning lights flash
twice and the horn beeps once as a re-
minder that the doors are already locked.

● If a door is open and you press the

button, the doors will lock but the horn will
not beep and the hazard warning lights will
not flash.

The horn may or may not beep. For vehicles
without navigation system, refer to “Silencing the
horn beep feature” later in this section. For ve-
hicles with navigation system, refer to “How to
use the setting button” in the “Display screen,
heater, air conditioner, audio and phone systems”
section later in this manual.

Unlocking doors

Press the

button on the keyfob once.

● Only the driver’s door unlocks.
● The hazard warning lights flash once if all

doors are completely closed with the ignition
switch in any position except the ON posi-
tion.

● The interior lights and puddle lights (if so

equipped) turn on and the light timer acti-
vates for 30 seconds when the interior light
switch is in the DOOR position with the
ignition switch in any position except the ON
position.

LPD0209

LPD0210

Pre-driving checks and adjustments

3-9