NEC PlasmaSync 4210W - Manual (Page 34)

27
Information
Ⅵ
Screen modes
FULL* ................. The image is displayed over the
entire screen. Set this mode for wide
images. (16 : 9)
NORMAL* .......... Set this mode for the same size as
video pictures with a 4 : 3 aspect
ratio.
An 800
ן600 input signal is con-
verted to a 640
ן480 resolution
iage.
An 1024
ן768 input signal is con-
verted to a 640
ן480 resolution
iage.
An 1280
ן1024 input signal is con-
verted to a 597
ן478 resolution
iage.
* For compatibility set Table for Signals Supported on
page 50.
Adjusting the position of the computer image
V-POSITION .......
Adjusts the vertical position of the
image.
H-POSITION ...... Adjusts the horizontal position of
the image.
FINE PICTURE .. Adjusts for flickering.
PICTURE ADJ. ... Adjusts for striped patterns on the
image.
AUTO PICTURE . . Turn this on to have the monitor
automatically adjust "FINE PIC-
TURE"
Ⅵ
Restoring the factory default settings
Select “RESET” under the function menu. Note that this
also restores other settings to the factory defaults.