N-Tron 708M12 - Manual (Page 26)

(Revised 2011-07-20) Page 26 of 156
Administration – System, Continued…
By selecting the Modify button from the ‗Static‘ mode, you will be able to change the switch‘s IP
Configuration, IP Address, Subnet Mask, Gateway, Name, Contact information, and the Location of the
switch through the web management features. It is recommended to change the TCP/IP information through
the Command Line Interface (CLI) initially, but it defaults to the following:
IP Configuration - Static
IP Address – 192.168.1.201
Subnet Mask – 255.255.255.0
Gateway – 192.168.1.1