Nextel comm 3000 - Manual (Page 8)

Mitel 3000 Hotel Facilities User Guide
6
Hotel application programming start up
Administration programming
This section outlines the additional administration programming included in the Mitel 3000 Hotel
package.
Basic Programming procedure
The basic procedure is the same as described in the Mitel 3000 Administrator’s manual.
• From the programming extension (ext. 20 by default), press the PROGRAM key.
• Press the Scroll Down key (Ô) until “System Programming” is displayed.
• Select “System Programming”.
• Enter the System Programming Password (1111 by default)
NOTE:
All Hotel programming features can be done using the Maintenance and Programming
Software (MPS) application.
Entering the Hotel Name
The name entered here is printed on the guest phone bills.
• From the programming extension press the PROGRAM key.
• Press the Scroll Down key (Ô) until “System Programming” is displayed.
• Select “System Programming”.
• Enter the System Programming Password and select “System”.
• Press the Scroll Down key (Ô) until “Hotel Name” is displayed.
• Select the “Hotel Name” option and enter the name of the hotel using the keypad. Press key 2
once for A, twice for B, three times for C; 3 once for D, and so on. Up to 24 characters, including
spaces can be entered
From MPS:
Select Applications:
Select Hotel