NEC MultiSync LCD 1810X - Manual (Page 30)

Appendix
Español
Français
Deutsch
English
Italiano
EXIT CONTROL PROCEED RESET
OSM MUTE
DVI / D-SUB
E - 15 Controls
OSM Controls
To access OSM menu, press any of the control buttons ( , , , ) or the
PROCEED button.
To mute sound function, press the EXIT button.
To rotate OSM between Landscape and Portrait modes, press the RESET button.
NOTE: OSM menu must be closed in order to rotate and mute.
Main Menu Sub-Menu
EXIT
CONTROL /
CONTROL / Moves the highlighted area Moves the bar left /
left / rights to select right to increase or
control menus. decrease the adjustment.
PROCEED
RESET
NOTE: When RESET is pressed in the main and sub-menu, a warning window will
appear allowing you to cancel the RESET function by pressing the EXIT button.
Exits the OSM controls. Exits to the OSM main menu.
Moves the highlighted area
up/down to select one of the
controls Moves the highlighted area
up/down to select one of the
controls
Controls
DVI/D-SUB : Allows you to change between the DVI-analog, DVI-
digital and D-SUB signal inputs.
The OSM controls on the front of the monitor provide the following
functions:
Has no function.
Resets the highlighted contol
menu to the factory setting. Resets the highlighted contol
to the factory setting.
Activates Auto Adjust feature.
In Tool and Information Mode,
opens additional window.
CN912B-2/LCD1810X/78135322 00.5.26, 0:04 PM 30