NorthStar Navigation Explorer 538i - Manual (Page 30)

Northstar Explorer 538i/538 Installation and Operation Manual 30
8 Gauges display
The Gauges display shows boat data, such as
water speed, as analog or digital gauges.
To go to the Gauge display, press and
select Chart , then select Chart+Gauges.
If necessary, press twice to switch to the
Gauges display (see section 2-8-1).
Before using the Gauge display, set Speed
range and Max fuel flow (see section
17-11).
Chart
Gauges
Changing the Gauges display
1 Go to the Gauges display and press .
2 To select the gauge type.
i Select Gauge type.
ii Select Analog (round) or Digital
(numbers).
3 To select the gauge size.
i Select Gauge size.
ii Select Small, Medium or Large.
4 To change the data displayed:
i Select Gauge setup.
ii Change a gauge:
a) Press the cursor keys to highlight the
gauge.
b) Press to display a menu of data
items.
c) Select a data item that is available on
your system.
iii Repeat the above step to set the other
gauges. Press .
5 Press to return to the Gauges display.