Nilfisk-Advance America 5 - Manual (Page 5)

4
english
1) Options / model variants
POSEIDON 5
2.2 Operating elements See fold-out page at front of these
operating instructions.
1 Handle
2 Hose reel
3 Mains power lead
4 Tank filler for detergent
5 Pressure gauge
6 Detergent tank
7 High pressure hose
connection
8 Supply water connection with
water inlet filter
9 Check pump oil level
2 Description
2.1 Purpose This high-pressure cleaner has
been designed for professional
use in
– Agriculture
– industry
– transport industry
– automotive cleaning
– municipal facilities
– cleaning trade
– construction industry
– food industry
etc.
Chapter 5 describes the use of
the high-pressure cleaner for
various cleaning jobs.
Always use the cleaner as de-
scribed in these operating in-
structions. Any other use may
damage the cleaner or the sur-
face to be cleaned or may result
in severe injury to persons.
10 Pressure regulation
11 Detergent metering knob
12 Main switch
13 Pressure regulation on spray
lance
14 Spray lance
15 Receptacle for Spray lance
16 Spray gun
17 Detergent intake hose
18 Receptacle for electrical lead
pressure cleaner must be sub-
jected to a safety examination
in accordance with the „Acci-
dent Prevention Regulations
for Working with Liquid Spray
Jet Devices“ as required, but at
least every 12 months, by an au-
thorised inspector.
After all repairs or modifica-
tions to electrical equipment,
the protective conductor resist-
ance, the insulation resistance
and the leakage current must
be measured. Furthermore, a
visual inspection of the mains
power lead, a voltage and cur-
rent measurement and a func-
tion test must be carried out. Our
after-sales service technicians
are at your disposal as author-
ised inspectors.
The complete „Accident Preven-
tion Regulations for Working
with Liquid Spray Jet Devices“
are available from the Carl Hey-
manns Verlag KG, Luxemburger
Strasse 449, 50939 Cologne or
from the appropriate associa-
tion of employers’ liability insur-
ances.
Unloader valve
Unacceptably high pressure is
fed back without residual pres-
sure via a bypass line into the
intake line of the pump when the
safety device is tripped.
The unloader valve is set and
sealed at the factory and must
not be adjusted.