Netopia 3387W-ENT User Manual
Page 10
2-4 Getting Started Guide
Connect your computer, DSL line, and power source as shown.
1.
For a direct computer to router Ethernet connection, use the standard Ethernet cable included with your
router.
2.
Use the supplied RJ-45 Modem cable to connect the router to your cable or DSL modem’s Ethernet por t.
Be sure your cable or DSL modem is correctly installed according to its instructions.
3.
Connect the supplied power brick to a power outlet and the connector end to the router.
4.
Each computer using the wireless network requires its own Wi-Fi CERTIFIED™ 802.11b adapter to be
installed in the computer.
This may be purchased from any Wi-Fi CERTIFIED™ manufacturer for your par ticular computer.
You should now have: the power adapter plugged in; the Ethernet cable connected between the router and your
computer; and the telephone cable connected to its appropriate wall jack.
Power
Off / On
LAN
Modem
4
1
2
3
1
Modem
Ethernet
DC Power
2
3
4
DSL or Cable
Modem