Niles Audio HT-MSU - Manual (Page 22)

20
STATUS ACCESSORIES
CS12V CURRENT SENSING 12 VOLT TRIGGER
FG01173
Activates voltage controlled
devices by turning on another
component. Current-sensing
makes it compatible with any 110V
electrical device
LS-1 LIGHT SENSOR
FG00728
Senses the brightness of a
component’s front-panel display
and outputs a 12V DC sync signal
when the display is brightest
APC-2 CURRENT-SENSING OUTLET SWITCHER
FG00254
Accessory 12Volt DC power
adaptor. Provides enough current to
trigger up to six automated
switchers; also used for status on
receivers with switched outlets
1.25A 12VDC UNIVERSAL POWER SUPPLY
FG01035
Provides 12 V DC synch signal to
HT-MSU via 3.5 mm jack
EXPANSION ACCESSORIES
PAR4 SIMPLIFIED INFRARED ROUTER
FG01172
Routes IR commands to four
components. Used for IC2
TV Array feature
REMOTE CONTROL
R-8 HANDHELD IR REMOTE CONTROL
FG00939
Basic IR Remote Control for
control over HT-MSU