NEC DS1000/2000 - Manual (Page 38)

Feature Operation
34 ◆ Chapter 2: Features DS1000/2000 Cordless Telephone User Guide
Speed Dial
There are no Speed Dial numbers stored by default.
Note: You cannot program Personal or System Speed Dial bins from your Cordless Telephone. See your
Communications Manager.
To dial a System Speed Dial number:
1. Press TALK + Dial # + Dial the bin number (e.g., 200).
To dial a Personal Speed Dial number:
1. Press TALK + Dial # + Dial the bin number (e.g., 200).
Split
Split is disabled by default.
You must have a Split key programmed to use this feature. Refer to the Programmable Function Keys feature
for more.
To Split between your current Intercom call and a new Intercom call:
1. Press HOLD to place your current Intercom call on Hold.
2. Wait for your display to return to idle.
3. Place or answer second Intercom call.
4. Press the Split key to switch between your two Intercom calls.
To Split between your current outside call and an Intercom call:
1. Press TRANSFER to place the outside call on Hold.
2. Place or answer waiting Intercom call.
3. Press the Split key to switch between the Intercom call and the outside call.
To Split between your current Intercom call and an outside call:
1. Press HOLD to put your Intercom call on Hold.
2. Press a line key to place or answer your outside call.
3. Press your Split Programmable Function Key to switch between the calls.
To Split between your current outside call and a waiting Intercom call:
1. Press TRANSFER to place your current outside call on Hold.
2. Press TALK to hang up.
3. Place or answer new outside call.
4. Press the Split key to switch between your two calls.