NEC DS1000/2000 - Manual (Page 22)

Installation
Using the Headband Style Headset with your Cordless Telephone
18 ◆ Chapter 1: Installation DS1000/2000 Cordless Telephone User Guide
Connecting the Headset and using the Controls
To connect the headset and use the controls (Figure 22: Connecting the Headset and
Using the Controls):
● Plug the headset into the Headset Jack on the top of the handset.
● Use the Microphone Volume control to adjust the volume of your headset’s microphone
(i.e., your voice).
● Use the Headset Receiver Volume control to adjust the volume of the receiver in your head-
set (i.e., your caller’s voice).
● To temporarily turn off your headset microphone, slide the Microphone Mute switch into the
Microphone Muted position.
● Clip the Belt/Lapel Clip to your belt or lapel to secure the headset cord.
Figure 22: Connecting the Headset and Using the Controls
80683 - 16
Belt/lapel clip
Minimum
volume
Maximum
volume
Headset receive vloume
Microphone mute
Microphone
muted
Microphone
ON
Microphone volume
More
volume
Less
volume