Napco Security Technologies GEM-DXK3 User Manual

Page 5

K E Y P AD C O N T R O L S & I N D I C AT O R S

Window. Lights indicate system
status messages; digit display
indicates related zone, function or
error message numbers.

STATUS Light. Lights (green) to
indicate that the system is ready for
arming. If a zone is not secured the
light will be off and the zone will
display in the window. If a zone has
been bypassed, the STATUS light will
blink while armed.

ARMED Light. Lights (red) to indicate
that the system is armed. If an alarm
has occurred, the ARMED LED will
be flashing.

MENU Button. Selects available
system functions as displayed in the
window. The selected function is
executed by pressing the

button.

BYPASS Button. (1) Deactivates
selected zones from the system. (2)

Unbypasses a bypassed zone. (GEM-
P3200/9600 panels only).

RESET Button. (1) Resets various
system troubles, displays, etc. (See
text.) (2) Resets residential smoke
detectors.

Numerical Keys (1-9, 0). Used to
enter codes, zone numbers, etc.

ENTER Button. Entry key. Causes
the entered code or selected function
to be executed.

STAY Button. (1) Bypasses all
Interior Zones simultaneously ("STAY
Mode") to allow free movement within
the premises. Hold down

when the system is armed in "STAY
Mode" to cancel entry delay on Exit/
Entry Zones, causing an instant alarm
upon violation. (2) Scrolls the window
display forward (NEXT). (3) Answers
“YES” to questions in the window
display.

AWAY Button. (1) Arms all zones in
the system. (2) Scrolls window
display backward (PRIOR). (3)
Answers “NO” to questions in the
window display.

AREA Button (

). Selects other

areas and is used with emergency
buttons.

Emergency Buttons. Used with the

b u t t o n t o s i g n a l a n

emergency, as follows:

•

Press the

and the

buttons for Fire Emergency.

•

Press the

and the

buttons for Auxiliary Emergency.

•

Press the

and the

buttons for Police Emergency.

AC Light. Indicates AC Power is
present.