Napco Security Technologies GEM-DXK3 User Manual
Page 16

16
F U N C T I O N M E N U
4. Display System Troubles? Displays a 1- or 2-digit error code representing a
problem detected in the system. (See SYSTEM TROUBLE ERROR CODES for a
description of these codes). Use NEXT(
P
) and PRIOR (
Q
) to scroll
system troubles.
(For GEM-P9600/3200 panels only).
5. Display Fire Alarms? Displays alarms that have occurred on the Fire Zone(s).
Press the NEXT(
P
) and PRIOR (
Q
) buttons to scroll zones.
6. Display Fire Troubles? Displays trouble conditions that have been detected
on the Fire Zone(s). Use NEXT(
P
) and PRIOR (
Q
) to scroll zones.
7. Activate Chime? The Chime Mode will sound a tone at the keypad when the
programmed zone is opened while disarmed. To deactivate the Chime Mode,
execute Function 7 once again. Note: The Chime Mode is disabled while armed.
8. Activate Watch Mode?
(Optional - Watch Mode programmed? YES NO)
This optional feature simultaneously turns on all zones designated as Day Zones,
which will cause an indication at the keypad if a zone is opened while the system
is disarmed. To deactivate the Watch Mode, arm, then disarm. All Day Zones will
revert to regular Burglary Zones. Note: The Watch Mode is disabled while
armed.
04
INTERIOR BYPASS FIRE/TBL SYS TBL
CHIME
05
INTERIOR BYPASS FIRE/TBL SYS TBL
CHIME
06
INTERIOR BYPASS FIRE/TBL SYS TBL
CHIME
07
INTERIOR BYPASS FIRE/TBL SYS TBL
CHIME
08
INTERIOR BYPASS FIRE/TBL SYS TBL
CHIME