Operation instructions – Newcon Optik NV66-G2 User Manual
Page 14
10
5. OPERATION INSTRUCTIONS
5.1 Installing battery
Unpack the device. Unit is supplied with battery not
installed.
Prior to installing the battery, make sure the switch
(1, Fig.1) is in the OFF position and the lens cap is on.
Unscrew the battery compartment cover (5, Fig.1), and
install 2 fresh AA batteries. Observe the correct polarity
indicated on the housing. Screw in the battery
compartment cover back.
5.2 Switching the unit on
In daylight put on the lens cap prior to switching
the unit on.
To check if the unit is operational switch it ON (rotate
switch (1, Fig.1) clockwise) and look through eyepiece (4,
Fig.1). You should see greenish-lit screen. If the screen is
not lit check the battery.
See also other documents in the category Newcon Optik Optical devices:
- NEWCON LRB 7X50 (10 pages)
- LASER RANGE FINDER LRB 7X50 SPD (10 pages)
- NZT1-M2 (10 pages)
- LRB 4000CI (36 pages)
- SIB 20X 50M (2 pages)
- NIGHT VISION ATTACHMENT NVS-33 (40 pages)
- NVS 6 (44 pages)
- 20x40x100 (14 pages)
- NVS 7-8X (24 pages)
- NVS 7 (10 pages)
- LAM 3 IR (32 pages)
- NVS 22-2XT (16 pages)
- NEWCON Image Stabilizer SIB 16x50M (2 pages)
- NEWCON LRM1500 (24 pages)
- DN483 (16 pages)
- 150 (20 pages)
- LRB 7x50 (10 pages)
- DAY/NIGHT VISION SCOPE NVS 10MG (28 pages)
- NEWCON PHANTOM 20 (27 pages)
- NVS7-2/4xHD (6 pages)
- NIGHT VISION MONOCULAR (13 pages)
- LRB 20000 (30 pages)
- AN 25-125X80 (16 pages)
- LRB 6000CI (36 pages)
- BDN 14X50 (8 pages)
- DN482 (10 pages)
- BINOCULAR SIB 16X40 WP (8 pages)
- BDN 7x50 (6 pages)
- NEWCON Night Vision BN5 (6 pages)
- NSN: 5855-20-000-8284 NVS 7 (24 pages)
- LRB 20 000 (27 pages)
- NEWCON Image Stabilizer SIB 16X40 (8 pages)
- NVS 4 (20 pages)
- NIGHT VISION RIFLE SCOPE DN-140 (8 pages)
- BN-5 (6 pages)
- LRB 3000PRO (28 pages)
- NEWCON LRB 3000 PRO (14 pages)
- MB-2 (8 pages)
- 8x30 AN Military Binoculars with M22 Reticle (24 pages)
- 7x50 AN Binoculars with M22 Reticle (28 pages)