Novatel Merlin XU870 - Manual (Page 8)

2
3
Insert your Merlin XU870.
You’ll see the message “No Device Detected” on the
MobiLink control panel before you insert your Merlin XU870
into the ExpressCard slot. After you insert it, the message
will change to “Initializing Device”.
The LED on your Merlin XU870 will display a solid red light
while it searches for available networks.
When a network is found and attached to, the light on the
LED will begin to flash:
green for GPRS, violet for EDGE, or
blue for UMTS. The message on the MobiLink control panel
will change to “Ready”.
You’ll find a complete list of LED colors and related states
on page 47.