Side burner installation – Napoleon Grills MIRAGE 485 User Manual
Page 18
18
Side Burner Installation
4 X
N570-0082 (1/4-20 X 5/8")
3/8
12
Insert (4)1/4-20 x 5/8” screws through washers into threaded holes in side of base.
Do not tighten all the way. Slide assembled side burner over screw heads and
finish tightening. Attach 1/2” flex connector hose from manifold to fitting on end of
side burner hose. Fit orifice into burner tube and secure with hose retainer clip
supplied. Attach wire from manifold to side burner electrode.
1 X
N160-0016
4 X
N735-0001 (1 1/16” insulated washer)