Nortel Networks C4030 - Manual (Page 12)

14
C 4 0 3 0 H a n d s e t S t a n d a r d 1 . 0 0
Making a call in the Pre-Dial Mode
To make a call:
1. In Standby mode, dial the
number using the keypad (up to 26
digits).
Note: The dialed number displays
on two lines when you enter a
number with more then 10 digits. To
display more than 20 digits, the
character size is reduced.
2. Press the
j
key to initiate the call.
To correct an error: Move the cursor using the scroll
arrows.
or
Use the
r
key to delete a character
in front of the cursor or insert a
missing digit at the cursor location.
or
Press the
r
key for 2 seconds to
delete the whole line.
To hang up: Press the
j
key again.
You can place a call by pressing the
j
key before dialling the number.
A
f
icon displays as well.
It is not possible to use the
m
key in pre-dial mode. In pre-dial mode, the key
accesses the shortcut menu.