Niles Audio RS5 - Manual (Page 15)

4. Pull the ends of the security cable with the loops as tight as you can until the knot
around the security eyelet is tightened as shown in Figure 11.
5. Feed the Security Stake through the loops at the end of the security cable and
insure that they are inserted into the cable holder provided at the top of the stake,
as shown in Figure 12.
6. Pick a spot in the ground which the loudspeaker will cover and drive the security
stake all the way into the ground until the cable holder is completely under the
INS
TALL
A
TION
14
Figure 12 Security Stake
Attachment to Cable
Figure 11 Security Cable
Connected and Tightened
Figure 13 Security Stake
Driven into Ground
DS00366ACN_RS5Rock Speakers.qxp 1/19/05 10:06 AM Page 15