Nuvo NV-P2100 - Manual (Page 7)

7
NV-P2100
Audio Source Inputs
The P2100 amplifier features two audio inputs designed to accept a line level audio signal. Most audio equip-
ment is equipped with a stereo RCA output that allows the audio signal to be taken directly to the P2100’s audio
input. This can be accomplished two different ways. Either with a standard stereo audio cable with left and right
RCA jacks on each end, or using a cable with left and right RCA jacks at the source end and a stereo 1/8" mini
jack into the "AUDIO INPUT 2" on the P2100. Fig. 1.
The P2100 is an ideal accessory for use with a multi-zone audio system such as the NuVo Essentia six-zone sys-
tem, which has a stereo lineout for each zone. This allows the P2100 to easily integrate with the multi-zone sys-
tem and provide additional amplification when needed.
Fig. 1
The 1/8" mini plug allows a stereo audio source input with only one connection. Another alternative is to utilize
a cable with a stereo 1/8" plug on both ends for use as example from a computer as an audio
R
L SENSITIVITY
OdBV = 1.0RMS
-12 +6
0
LEFT
+6 -12
RIGHT
0
AUDIO
INPUT
2
INPUT OUTPUT
To a preamp lineout, or to the
audio output of your source
equipment.