Connection mode tab – NetComm V100 User Manual
Page 18

V100 User Guide
YML749Rev1
18
www.netcomm.com.au
Connection Mode Tab
Clicking on the Connection Mode tab brings up the following window:
PPPoE:
Select this option if your V100 ATA uses PPPoE to authenticate
with the modem / router.
User name:
The PPPoE account username. This is not your VoIP number.
This username is issued by your ISP.
Password:
The PPPoE account password. This is not your VoIP password.
This password is issued by your ISP.
DHCP:
Specifies that the V100 ATA must request its TCP/IP address
details from a DHCP service running on your network. This
service is usually available on your ADSL modem / router.
Fixed IP:
Allows you to specify the addressing details of the V100 ATA on
your network: