NordicTrack Workout TV Console - Manual (Page 9)

9
Next, press the VOLUME + or – button.
The console will begin scanning all TV
channels. A single beep will be heard as
each channel is reached. If no broadcast
signal is detected on a channel, the
channel will be skipped; if a signal is
detected, the channel will be stored in
memory. During the scanning process, a
graphic will appear on-screen to show
which channel is being scanned. The scanning process will continue until
the highest channel is reached. The con-
sole will then automatically exit the con-
figuration mode.
Exit the configuration mode.
If you did not initiate the channel scan-
ning function, hold down the TV ONLY
button and the VOLUME + button for
about two seconds to exit the configura-
tion mode.
5
Channel:
Volume: