Neuros Audio MPEG-4 - Manual (Page 55)

51
Troubleshooting
Please visit the website www.neurostechnology.com to get
the latest trouble shooting information and FAQ about the
Recorder 2.
Symptom Possible cause Possible remedy
No video display. Unit has no power. Ensure that unit is
plugged in correctly. You
should see a green LED
on the front panel if it is
plugged in correctly.
Refer to “About the Neu-
ros MPEG-4 Recorder 2”
on page 3.
Cable connecting AV Out
to video monitor is not
properly connected. Refer to “Connecting to a
TV (viewing only)” on
page 11 for information.
Remote control not
functioning. Obstruction in front of
infrared sensor on
Recorder 2. Ensure that a line of sight
exists between the
remote control and the
sensor on the Recorder2.
Low battery power. Replace battery in the
remote control.
Memory card not
recognized by the
Recorder 2 Card not inserted
properly. Refer to “Inserting the
Compact Flash (CF) or
1"Micro Drive Card” on
page 9 and “Inserting the
MS Duo/Pro Duo, MMC
or SD Series Card” on
page 10 for information
about proper handling of
memory cards. Never
force memory cards into
the Recorder 2.
MPEG-4 Video Recorder_UM_EN.book Page 51 Monday, June 19, 2006 8:22 PM