Nokia MOBILE PHONE N86 - Manual (Page 32)

Video light
To increase light levels when recording video in low light,
select .
Scenes
Scenes are only available in the main camera.
A scene helps you to find the right colour and lighting
settings for the current environment. The settings of each
scene have been set according to a certain style or
environment.
The default scene in the image mode is
Auto , and in the
video mode Automatic (both indicated with ).
To change the scene, in the active toolbar, select Scene
modes and a scene.
To make your own scene suitable for a certain
environment, scroll to User defined , and select
Options > Change . In the user defined scene you can
adjust different lighting and colour settings. To copy the
settings of another scene, select Based on scene mode
and the desired scene. To save the changes and return to
the scenes list, press Back . To activate your own scene,
scroll to User defined , press the scroll key, and select
Select .
Capture images in a sequence
The sequence mode is available only in the main camera.
To set the camera to capture images in sequence (if
enough memory is available), in the active toolbar, select
Sequence mode .
To start capturing images in a quick sequence,
select Burst , and press and hold the capture key. The
device captures images until you release the key or until
the memory runs out. If you press the capture key briefly,
the device captures six image in a sequence.
To capture two or more images in defined intervals, select
the desired time interval. To capture the images, press the
capture key. To stop capturing images, select Cancel . The
number of images taken depends on the available
memory.
The captured images are shown in a grid on the display.
To view an image, press the scroll key. If you used a time
interval, only the last captured image is shown on the
display. You can view the other images in the Photos
application.
You can also use the sequence mode with the self-timer.
To return to the sequence mode viewfinder, press the
capture key.
To switch off the sequence mode, in the active toolbar,
select Sequence mode > Single shot .
32
Ca
mera