Nokia MOBILE PHONE N86 - Manual (Page 139)

internet through a WLAN if available and through a packet
data connection if not.
To create a new access point group, select Options >
Manage > New destination .
To add access points to an access point group, select the
group and Options > New access point . To copy an
existing access point from another group, select the
group, scroll to an existing access point, and select
Options > Organise > Copy to other dest. .
To change the priority order of access points within a
group, scroll to an access point and Options >
Organise > Change priority .
Packet data access points
Select Menu > Tools > Settings and Connection >
Destinations > Access point , and follow the instructions
on the display. Or, open one of the access point groups,
select an access point marked with , and select Edit .
Use the instructions provided by your service provider to
edit the following:
Access point name — The access point name is provided
by your service provider.
User name — The user name may be needed to make a
data connection, and is usually provided by your service
provider.
Prompt password — If you want to set the device to ask
for a password every time you log in to a server, or if you
do not want to save your password in the device, select
Yes .
Password — A password may be needed to make a data
connection and is usually provided by your service
provider.
Authentication — Select Secure to always send your
password encrypted or Normal to send your password
encrypted when possible.
Homepage — Depending on the access point type you
are setting up, enter the web address or the address of the
multimedia message centre.
Use access point — Select After confirmation to set the
device to ask for confirmation before the connection using
this access point is created, or Automatically to set the
device to connect to the destination using this access point
automatically.
Select
Options > Advanced settings and from the
following:
Network type — Select the internet protocol type to
transfer data to and from your device. The other settings
depend on the selected network type.
Phone IP address (for IPv4 only) — Enter the IP address
of your device.
DNS addresses — Enter the IP addresses of the primary
and secondary DNS servers, if required by your service
provider. To obtain these addresses, contact your internet
service provider.
Proxy server address — Enter the address of the proxy
server.
Proxy port number — Enter the port number of the proxy
server.
139
Se
ttings