NordicTrack CX 998 NEL7095.2 User Manual

Page 19

To use an iFIT.com CD or video program, the elliptical
exerciser must be connected to your CD player or
VCR. See HOW TO CONNECT YOUR CD PLAYER,
VCR, OR COMPUTER on pages 16 to 18.

To pur-

chase iFIT.com CDs or videocassettes, call the toll-
free telephone number on the front cover of this
manual.

Follow the steps below to use an iFIT.com CD or
video program.

Press any button on the console or begin
pedaling to turn on the console.

See step 1 on page 11.

Select the iFIT.com mode.

To select the
iFIT.com mode, press
the iFIT button. The
track and the letters
“iFIT” will light.

Press the Play button on your CD player or
VCR.

Note: If you are using an iFIT.com CD, insert the
CD into your CD player; if you are using an
iFIT.com videocassette, insert the videocassette
into your VCR.

A moment after the play button is pressed, your
personal trainer will begin guiding you through
your workout. Simply follow your personal trainer’s
instructions.

The program will function in almost the same way
as a preset program (see step 3 on page 13).
However, an electronic “chirping” sound will alert
you when the resistance setting and/or pace set-
ting is about to change.

Note: If the resistance of the pedals and/or the
pace setting does not change when a “chirp”
is heard:

• Make sure that the letters “iFIT” appear in

the display.

• Adjust the volume of your CD player or VCR.

If the volume is too high or too low, the con-
sole may not detect the program signals.

• Make sure that the audio cable is properly

connected and that it is fully plugged in.

Monitor your progress with the displays.

See step 4 on page 11.

Measure your heart rate as desired.

See step 5 on page 12.

Turn on the fan if desired.

See step 6 on page 12.

When you are finished exercising, the console
will automatically turn off.

See step 7 on page 12.

HOW TO USE AN IFIT.COM CD OR VIDEO
PROGRAM