Nokia BH-806 - Manual (Page 8)

End an ongoing call, and activate a held call
Touch .
If you redial or use voice dialling, the call is made on the device you last had an active
call on with the headset.
Settings
Deactivate voice prompts
Get verbal feedback and instructions, for example, when pairing your device.
Make sure the headset is switched on, and touch and hold for 9 seconds. You hear a
voice prompt, and a yellow indicator light flashes once.
Activate voice prompts
Touch and hold for 9 seconds. You hear a voice prompt, and a green indicator light
flashes once.
Clear device pairings
When you clear the device pairings, you need to select the language again.
1 To switch the headset off, press and hold for 4 seconds.
2 Press and hold for 9 seconds. The headset beeps twice, and the red and green
indicator lights alternate.
3 When the headset switches on, follow the voice prompts. Pairing mode is activated.
Change the language
When you change the language, your device pairings are cleared, and you need to pair
and connect your headset to your device again.
1 To switch the headset off, press and hold for 4 seconds.
2 Press and hold for 9 seconds. The headset beeps twice, and the red and green
indicator lights alternate.
3 When the headset switches on, follow the voice prompts. Pairing mode is activated.
Product and safety information
Battery and charger information
This device has an internal, nonremovable, rechargeable battery. Do not attempt to remove the battery from the device as you
may damage the device.
8