Nokia BH-806 - Manual (Page 5)

When you unplug a charger, hold and pull the plug, not the cord.
The fully charged battery has power for up to 5 hours of talk time and up to 100
hours of standby time. If you keep the headset in the carrying clip, the standby time is
up to 3 months.
When the battery charge is low, the red indicator light flashes, and you hear a voice
prompt every 5 minutes. If you have deactivated voice prompts, the headset beeps every
5 minutes.
Check the battery charge
Make sure the headset is switched on, and touch and hold for 2 seconds. A voice
prompt tells you the battery charge level.
Switch the headset on or off
Switch on
Remove the headset from the carrying clip. The headset beeps, and a green indicator
light flashes once.
The headset connects to the last connected device. If you have never paired the headset
with a device, or you have cleared the device pairings, pairing mode is activated.
Switch off
Place the headset in the carrying clip. The headset beeps, and a red indicator light flashes
once. All active calls are ended.
If not connected to a device within 30 minutes, the headset switches off.
Tip: Don't have the carrying clip with you? To switch the headset off, press and hold
for 4 seconds. To switch the headset on, press .
Pair and connect the headset to your mobile device
Before using the headset, you must pair and connect it to a compatible device.
1 To switch the headset off, press and hold for 4 seconds.
2 Switch on the device to pair with.
3 If you have never paired the headset with a device, or you have cleared the device
pairings, switch the headset on.
If you have previously paired your headset with another device, press and hold
for 5 seconds.
5