Navigon MN4 - Manual (Page 29)

User's manual BLUE Edition
Operating the navigation software - 27 -
Entry Significance
Position Indicates the address of your current
position.
Save Tap this button to add the current address to
the saved destinations list.
Quit Tap this button to quit the GPS screen.
Switching the GPS-receiver on / off
The GPS-receiver consumes energy. This is of significance when
the system is operated in battery mode, e.g. when you are on
your way on foot or by bike. Switch therefore the GPS-receiver
off when you don’t need it for a certain time.
1. Tap the Energy icon on the lower right corner of any
screen.
The E
NERGY
screen opens:
2. Tap the Off button to switch the GPS receiver off.
3. When the GPS-symbol in the upper right corner becomes red,
tap the Cancel button.
Notice: Switching the GPS-receiver on works the same way.
3.2.2 Hardware keys
Hardware keys On the upper right corner of your device, there are the following
hardware keys which allow to accede quickly the most important
functions:
On / Off
Turns the device on / off.
Configuration
Opens the C
ONFIGURATION screen.
Back
Opens the precedent screen.
Destination
Opens the D
ESTINATION
screen.