Nostalgia Electrics Retro RHD-400 - Manual (Page 6)

ENGLISH
5
CLEANING

Make sure the unit is unplugged before cleaning. Allow all parts to COOL to the
touch, especially the roller assembly and drip tray.
 Before first use and continuing after each use, be sure to wipe off the roller
assembly with a damp cloth and dry thoroughly. When more concentrated cleaning
is necessary, wash in warm soapy water, rinse, and dry thoroughly.
To prolong the life of your RETRO HOT DOG ROLLER™, hand-washing parts is
advised. Dishwasher use is not recommended.
TROUBLESHOOTING
Power Light does not turn ON. Check electrical plug to ensure it is fully
plugged in.
Rollers are not turning. Make sure Power Light is On and the unit
is properly plugged in. Turn unit off and
on again. Make sure the end roller pin is
correctly engaged in the motor base
receptacle.
Uneven heating. Switching the hot dogs from one side to
the other is helpful if this occurs.
Hot dogs are not rotating on the rollers. Due to packaging of hot dogs, sometimes
they are square in shape. Adjust the hot
dogs manually on the rollers, until they
begin to plump from cooking. They will
eventually even out in shape and
automatically rotate on the rollers.