Nostalgia Electrics Retro RHD-400 - Manual (Page 5)

ENGLISH 4
USING YOUR RETRO HOT DOG ROLLER ™
First, find a stable surface near an electrical outlet before starting. Roller Assembly must be
engaged correctly to operate properly. Confirm that the drip tray is in place when using the
roller assembly to cook hot dogs. Always make sure your cord is away from any water
source. If needed, it is acceptable to use an extension cord.
INSTRUCTIONS:
1. The dial on the right of The RETRO HOT DOG ROLLER™ turns on the power. Turn to
the ON position. The red power indicator light should come on. The dial on the left
regulates the heating temperature, from LOW to HIGH. Turn on HIGH. Let the unit
warm up for 3 minutes or so, and place the hot dogs on the rollers (evenly spaced).
Up to 8 regular sized hot dogs or 12 breakfast sausage links can be cooked at one
time.
2. You will see the hot dogs begin to turn. They will continue to turn at approximately two
cycles per minute. You will notice the color begin to darken as they are cooking. The
hot dogs should be cooked for 15 to 20 minutes (depending on the type and size of
the hot dogs). The thicker the hot dog, the longer it will take to cook through.
3. After they have cooked, turn the heater knob down to a medium heat to keep the hot
dogs warm and still rotating. As hot dogs are taken off, they can be replaced with new
hot dogs to cook if need be. Remember to readjust the temperature to HIGH when
putting on new hot dogs.
By following these simple instructions, your RETRO HOT DOG ROLLER™ will be fun for
friends, family, and kids of all ages!
BREAKDOWN
Canopy Top
B
Four Canopy
Poles C
Drip Tray A
A
Motor Base
D
Adjustable
On/Off Heat
Control E
Stainless
Steel Roller
Assembly F