Appendix a - technical specifications, Appendix a — technical specifications – NorthStar Navigation 491 User Manual
Page 31
491 INSTALLATION MANUAL Revision A
PAGE 27
APPENDIX A — Technical specifications
Table 8: 491 technical specifications
Performance characteristics
Frequencies
50 and 200 kHz
Output power
1000 watts with dual-element transducers
600 watts with single-element transducers
Pulse lengths
0.1 to 2 ms
Pulse repetition rate
30 to 600 pulses/min
Alarms
Fish, bottom, and temperature
Update rate
10 Hz maximum (depends on water depth)
(up to 20Hz when used with the Northstar
6000i)
Zoom modes
Marker, bottom lock, bottom lock/center,
bottom
Auto modes
Fishing or cruising
Navigation data
Shown on bottom of screen
Display modes
Single/dual frequency, split-screen, four
zoom modes, A-Scope
Physical characteristics
Dimensions
8.78 x 7.22 x 2.35 inches (including back-
plate)
Weight
2 pounds
Environmental characteristics
Temperature
-25˚C to +60˚C operating temperature
-55˚C to +90˚C storage temperature
Standards
Waterproof, sealed design meets the follow-
ing: EN60529 IP65; EN60945 emissions; CE
Electrical characteristics
8 to 36 VDC, 8 watts, reverse polarity and
overvoltage protection
Transducer outputs protected against open
circuit/short circuit