NETGEAR FS518T - Manual (Page 21)

applications 3-2
Desktop Switching
Figure 3-1 illustrates the Model FS518T switch, used as a desktop switch to build a
small network that enables users to have Gigabit (1000 Mbps) access to a file server.
Key:
1 = Server with 2000 Mbps connection (1000 Mbps full-duplex)
2 = Model FS518T Fast Ethernet Switch (Normal/Uplink push button set to Normal position)
3 = PC with 10 Mbps connection
4 = PCs with 100 Mbps Fast Ethernet adapter cards installed
Figure 3-1. Model FS518T Switch Used as a Desktop Switch
Note: If a full-duplex adapter card is installed in the server or PC, a 2000 Mbps
connection is possible on the port where the server is connected.
Normal/Uplink 10 11 12
FS518T MODEL
Fast Ethernet Switch 18PORT
10/100Mbps Switching
9
Green = FDX, Yellow = COL
Rx/Tx
14 15 16 13 18 Power
2 3 4 1 6 7 8 5 17 1000M 100M Rx/Tx
Green = FDX, Yellow = COL
1 100M 10M 4 5 On = Link
13 16
8
18
17
12 9
9312FB
4
3
2
1
1000 Mbps
100 Mbps
10 Mbps
Key
FS518T.Manual.FINAL 5/19/00 12:55 PM Page 22